Big damage! What I've to do? Help me please

[artax]

Big damage! What I've to do? Help me please

SANY0219.jpg

[xl97]

any leads left to solder to?


buy another one.. people usually have these laying around after conversions.


what hilt/string blade is it?

[artax]

I don't understand your first questioni, sorry, all the led of left works good.

It's an Hasbro Anakin 2007.

[xl97]

first question was asking if ther was any leads (wires) left to solder it back together...and then secure both parts/ends..


however "I" think it would probably be best if you just sourced a new led string blade...

Where are you located?

[artax]

If I understand well, I want to do that: led on left to solder it back together, and then secure both parts/ends.

I'm from Italy

[xl97]

I dont have a led string blade to look at.. but there has to be TRACES on the 'ladder' that need to be soldered back together..


I would try to first secure the ladder part back together. (epoxy).. and let it dry...

then use some wire or copper foil to bridge/make a jumper for the traces that are broke on either side

(Im guessing sourcing a new one in Italy would be hard??)

maybe another Italy/overseas member has string blade they can ship to you??