Activation box style 2, av switch over 18650 batts chassis disc, will it fit?

[Zahc Zi Phan]

OH DUDES! MAJOR BRAIN FARRRTTT!! I thought I had the 14500, but I DON'T !!! I have the 18500 rated at 1400mah. Crap! SORRY Marco, I feel like a total tool! I need sleep!! I think the 18650 is only a TEENY bit wider than my 18500 and it ALMOST FRIGGIN FIT with box 14. I really want to say that with box 2, it WILL fit. There was seriously like a millimeter too much switch post keeping that bugger from going in. With the added height of box 2, you should be in the clear, just make sure that you don't put too much solder on the bottom of the posts. CRAP! Still feel bad.
How about that now Starwaster, 700ma drawing from 1400mah would be like TWO hours then right? Give or take (probably take) of course. Gotta think about the 2w bass speaker and accent led's...

[Kevin Starwaster]

OH DUDES! MAJOR BRAIN FARRRTTT!! I thought I had the 14500, but I DON'T !!! I have the 18500 rated at 1400mah. Crap! SORRY Marco, I feel like a total tool! I need sleep!! I think the 18650 is only a TEENY bit wider than my 18500 and it ALMOST FRIGGIN FIT with box 14. I really want to say that with box 2, it WILL fit. There was seriously like a millimeter too much switch post keeping that bugger from going in. With the added height of box 2, you should be in the clear, just make sure that you don't put too much solder on the bottom of the posts. CRAP! Still feel bad.
How about that now Starwaster, 700ma drawing from 1400mah would be like TWO hours then right? Give or take (probably take) of course. Gotta think about the 2w bass speaker and accent led's...

That's better, but the 18500 and the 18650 are the same width... (18mm) Did you possibly mean the 14500 again?

:P

[Marco]

Hahaha Zahc Zi Phan

Thanks alot so finally I have a setup that will work or at least should work!

Btw.: I have panasonic 18650 they are rated 3100 mAh and I am driving two green dice in // each @ 1A... BOOM BRIGHTNESS IN YOUR FACE!!!!

[Zahc Zi Phan]

Starwaster: Haha I'm a dumbass. I assumed that the 18650 would be a bit wider than the 18500, the slightly higher number is responsible for my mouth-diarrhea. Lol. Maybe a tad longer then? Or just more powerful?

Marco: No prob buddy. I apologize for my cranial-flatulence. Zahc + no sleep = DERRR!
Sounds like it would work out for ya, just keep in mind that philosophy and physicality are two very different things. Hard to tell really until parts are in hand.
Sounds like a sweet setup bro! I have the single-die deep red rebel. Can't wait to wire it up, the anticipation is killing me. Anyone know how the brightness of a rebel @ 700ma would compare to a master replicas episode 3 anakin force fx?? Brighter I assume? Never seen a luxeon in person, I assume BRIGHTER than the FX?

[Zahc Zi Phan]

Whoop, double post (brighter I assume + I assume brighter). DERR. I'm going back to bed. ;P

[Kevin Starwaster]

Starwaster: Haha I'm a dumbass. I assumed that the 18650 would be a bit wider than the 18500, the slightly higher number is responsible for my mouth-diarrhea. Lol. Maybe a tad longer then? Or just more powerful?

Marco: No prob buddy. I apologize for my cranial-flatulence. Zahc + no sleep = DERRR!
Sounds like it would work out for ya, just keep in mind that philosophy and physicality are two very different things. Hard to tell really until parts are in hand.
Sounds like a sweet setup bro! I have the single-die deep red rebel. Can't wait to wire it up, the anticipation is killing me. Anyone know how the brightness of a rebel @ 700ma would compare to a master replicas episode 3 anakin force fx?? Brighter I assume? Never seen a luxeon in person, I assume BRIGHTER than the FX?

Longer. The numbers in the battery actually tell you its length, width and type. The first two are width (18mm). Second two are length (65mm). The final digit is its type (0=single cell? cylindrical cell? Not sure; I've seen it described both ways)

So, 18650 is 18mm x 65mm.