Best Starkiller in the galaxy

[killbillcruz]

Hey guys hope the force is strong with yall
please help me on this saber
i have a cf 4.1 and a mini speaker
i need a bat set up that will rock it in only the four inches i have in the hilt..
help...
IMG_1311.jpgIMG_1312.jpgIMG_1313.jpgIMG_1314.jpg
more pics soon!

[Lord Dottore Matto]

ThaT CF can run ON A SINGLE 18650 from the shop. NEwer CF's need 7.4V, but that one will do okay on 3.7V (in other words, a single 18650 pre made pack)

[Xanatos1986]

I was going.to get one of those until I realizes only a 10-32 button head screw was holding everyevery togeather I'd like one for a static prob maybe..

[Crystal Chambers]

4 inches should be plenty of room. You could stack your CF on 2AA sized Li-Ions and still have around 1.5" left for speaker and a bit of resonating space/port.

[TrypWyr]

I'm having pretty much that same issue: fit just about everything in a 4" section. I originally had the TCSS 14500x4 pack and it's right at 4", too big for my use. I ended up ordering a 14650x2 pack. About 1/3 The capacity, but short enough for the section without sacrificing too much run time (I hope).

Of course, if you build your own packs, you'd prolly have more versatility...

Good luck!

Tryp

[Xanatos1986]

If I can fit 2 14500, a cf and a v4 speaker holder in a 3 inch space you can

[killbillcruz]

meh..
ill do the 3.v then ...
now where do the buttems go

[killbillcruz]

also .. this should be an edit.
also the diameter is only about an inch or less.
xana .. the thing is pretty solid. and it took 6 months to make /get . so im really happy about it . i think , in my opinion it is nicer than the ones i have seen available . it is more acuarrate and it spins supper fast. it was taken from a 3 d model

[Xanatos1986]

I was going to get one but when I saw how it was put togeather I decided not to, it is a nice piece though just not my cup of tea

[FenderBender]

Have you held one of mine to compare it to? I don't think so. And if that hilt is made by who I think it's made by, he ripped a lot of it off of our design, and that is not more accurate at all.