sound led vibration + flash

[mrknify]

With the saber set up via the 2010 obi "circuit" using a pnp from the speaker to the led, would a pnp from the battery to the pnp from the speaker work for setting up the flash on clash as a speaker bypass...


or would it cause the sound to intermittently cut out.

[Jedi Mynock]

could you draw a diagram in MS paint or something?
its confusing because from your description, it sounds like you want to use TWO pnp's, and one wired to the other??? im going cross-eyed trying to envision what you are describing.

so far im going to say "no". unless you show me something different with a drawing of your wiring.

[DarkarNights]

Knify, sometimes you are harder to understand than Jar Jar Binks.

I believe what he's trying to achieve is a 2010 Obi Econo with the flicker effect setup and trying to figure out how to make it flash on clash activated by the speaker?...Actually I have no idea what he's trying do, the more I read it, the more confused I get.

[mrknify]

ok, I do speak in abstracts,and I know I need to be a little more clear, soo.... :P

IMG_20120722_142201.jpg

hope this clarifys... and maybe i just answered my question......

[Jedi Mynock]

okay so how is it going to get clash input so it can flash the other die? i think you did answer your question lol

[mrknify]

okay so how is it going to get clash input so it can flash the other die? i think you did answer your question lol

gears turning, i'm doing a new drawering(lols) this one a bit more technical....

[DarkarNights]

I still can't figure out what the end goal is?

[mrknify]

working on flash on clash, with the flickerimg effect of speaker setup

[DarkarNights]

How about using a multi die LEDEngin with one set of dies wired in the normal configuration, which would react to the boards built in flash effect, and the other set of dies wired for the flicker effect? You'd be using 2 PNP transistors, but not connected together, just one for each die set. This is just a theory and I have no idea if it would work well or how it would look. I can't think of any other way to achieve both flicker and clash on the econo.

[mrknify]

alright, this helps im going to look into some things on monday, i think this will be a great new way to mod the econo boards...