I could have sworn that I saw a thread on wiring up a saber using JST connectors on the recharge port with pictures and every thing. But now I just cant seem to find it. I have wired up recharge ports in the past, but I'm having trouble visualizing how it should work with the JSTs. If any one would happen to know were to find the post that has disappeared on me could you please link it? Or if I was hallucinating, could some one please throw up a quick diagram of how they should be wired, and what goes were? I have already read through the recharge port thread several times to see if there was something I was forgetting.

I know You have One prong that goes to the negative on the board; A Prong that goes to the Negative on the Battery Pack; And a prong that that gets split to go to the positives on the Battery pack and the board... So you would need to link the Battery Pack pos and neg on one GTS and the Board pos and Neg on the second GTS....

So would you just split the positive as normal and wire it to the appropriate JTS with it's negative, and then plug the GTSs from the recharge port into the power JTS on the board and the JTS on the Battery Pack?

Now that I've talked through it, that makes sense, but confirmation would be great. This would also still allow for the use of a kill key correct?