Results 1 to 2 of 2

Thread: Direct Drive Modular Overdrive

  1. 06-30-2012, 11:10 AM #1
    Darth Odious
    Darth Odious is offline
    Darth Odious's Avatar
    Join Date
    Aug 2010
    Posts
    123

    Default Direct Drive Modular Overdrive

    I've recently upgraded a couple of resistor driven sabers from lux rebel/III/P4 to LedEngin 5 watts, with a internal wiring design where you can swap resistors and LED modules to overdrive on the fly. Here is a diagram that could be helpful to the folks out there.

    7473576440_9044dc703e.jpg
    Reply With Quote Reply With Quote
  2. 06-30-2012, 11:36 AM #2
    Kevin Starwaster
    Kevin Starwaster is offline
    Join Date
    Jan 2012
    Posts
    209

    Default

    Quote Originally Posted by Darth Odious View Post
    I've recently upgraded a couple of resistor driven sabers from lux rebel/III/P4 to LedEngin 5 watts, with a internal wiring design where you can swap resistors and LED modules to overdrive on the fly. Here is a diagram that could be helpful to the folks out there.

    7473576440_9044dc703e.jpg
    JST connectors to plug the resistors into? That's what I did on mine.
    The lightsaber hilt is capable of producing a blade of pure energy. The lightsaber hilt has proven to be completely safe. The saber blade however has not. Do not touch the operational end of the saber blade. Do not look directly at the operational end of the saber blade. Do not immerse the saber blade into your flesh, not even partially.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules