ok, so here's a pic of my wiring Diagram for a recharge port, let me know if I'm wrong on something.
JediMasterTim's Wiring Diagram
ok, so here's a pic of my wiring Diagram for a recharge port, let me know if I'm wrong on something.
Last edited by JediMasterTim; 06-19-2012 at 01:09 PM.
Seems like you have your wires crossed at your recharge port.
The switch in the port breaks the negative (ground - ) wire from the battery pack to your saber electronics, not the positive.
Unless I am reading your diagram wrong, which I could be.
What he said.. Read the manual
\/ \/ \/
Last edited by slothfurnace; 06-19-2012 at 02:59 PM.
CordaroyFog: you know, its really mean to set the bar that high.
You're way off. Go here, http://www.thecustomsabershop.com/Pe...-V20-P612.aspx, and download the PC2.0 Owner's Manual. Turn to page 10, and study the wiring diagram on that page.
so, from what i understand from reading the manual, this is what it should be like?
Nope.
You aren't gettng the switching with that diagram.
If you hook up your power supply to the recharge port, you're gonna fry your electronics with it like that.
Here's a quick sketch of what it should be...
Last edited by slothfurnace; 06-20-2012 at 12:55 PM.
CordaroyFog: you know, its really mean to set the bar that high.
so, like this:
How it would be if there is no electronics? I have a battery pack (3 li-ion in series, 2300mah each) and a 12 volt charger that gives 850ma, can I connect it to the battery directly to charge?Originally Posted by slothfurnace
Nope.
You aren't gettng the switching with that diagram.
If you hook up your power supply to the recharge port, you're gonna fry your electronics with it like that.
Here's a quick sketch of what it should be...
Posting Permissions
Reply With Quote
Bookmarks