Results 1 to 7 of 7

Thread: the crappy hasbro board refit

  1. #1
    Youngling
    Youngling
    mrknify's Avatar
    Join Date
    Mar 2012
    Location
    Edmonton, AB
    Posts
    157
    Blog Entries
    2

    Thumbs up the crappy hasbro board refit

    ok i posted the parts when i tood the hasbro board out of its over complicated wrapping scheme.....


    led string blade removed (left clash on blade for later..)

    hooked up to my vandal momentary, a buckpuck and my 700mA red orange....

    heres the vid and a close up photo.

    http://youtu.be/hg1S0IWNAHM

    2012-06-17 21.56.19.jpg2012-06-17 21.55.57.jpg2012-06-17 14.18.47.jpg

  2. #2
    Youngling
    Youngling
    mrknify's Avatar
    Join Date
    Mar 2012
    Location
    Edmonton, AB
    Posts
    157
    Blog Entries
    2

    Default

    update, i am working on the whole process on this thread here http://forums.thecustomsabershop.com...ight=steampunk
    so not to repeat anything.

  3. #3

    Default

    I'm interested in that steam punk saber your working on. my friend wants me to make him one so I'm not sure which rout to go.

  4. #4

    Default

    Do a Google search for "steampunk lightsaber" and look at the pictures that come up for inspiration...and then pick your jaw and tongue up off the floor afterwards.

  5. #5
    Youngling
    Youngling
    mrknify's Avatar
    Join Date
    Mar 2012
    Location
    Edmonton, AB
    Posts
    157
    Blog Entries
    2

    Default

    steampunk is brass and leather. make sure you give it a well used look, my build is on hold right now, as i'm working on the vader hasbro sound board, and building an "audio" jack sleeve due to my button on the pommel.

  6. #6
    Youngling
    Youngling
    mrknify's Avatar
    Join Date
    Mar 2012
    Location
    Edmonton, AB
    Posts
    157
    Blog Entries
    2

    Default

    Quote Originally Posted by Odin View Post
    I'm interested in that steam punk saber your working on. my friend wants me to make him one so I'm not sure which rout to go.
    k, build a mhs pattern, then decide what areas get leather, look at the long choke, it is perfect for 8oz leather, i have the short choke with leather in it. my saber is a bit bulky with the sleeve i have put on it, so im looking into that too.

  7. #7
    Youngling
    Youngling
    mrknify's Avatar
    Join Date
    Mar 2012
    Location
    Edmonton, AB
    Posts
    157
    Blog Entries
    2

    Default

    alright i have a new pic of the chip,if you have one just wire it up like the older version, i'm still workng on specifics.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •