Results 1 to 10 of 23

Thread: MHS Starkiller "Promo" saber BL

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11

    Default Update

    Howdy again,
    I did a little work on my switch set up with the box. I decided to go with an MR Vader, 3.7v Ultrafire 18650 4000mah, inhilt recharge. For now....yes some may consider it lazy. But what the heck, I did buy enough parts for two of these hilts The MR provided me with a really good option for a latching switch set up in the box that I have cut down, as you will see below.

    My half of a switch box looking at the "open" end

    Then I cut out a piece of 3/8 aluminium rail stock to fit the height of the inside of the box


    I fit them together and this is what I ended up with.
    EDIT:
    This is what I eventually ended up with. A single momentary tactile switch. The hole drilled into the rail stock.
    Last edited by Noyl Wendor; 04-22-2012 at 09:36 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •