Howdy again,
I did a little work on my switch set up with the box. I decided to go with an MR Vader, 3.7v Ultrafire 18650 4000mah, inhilt recharge. For now....yes some may consider it lazy. But what the heck, I did buy enough parts for two of these hilts The MR provided me with a really good option for a latching switch set up in the box that I have cut down, as you will see below.
My half of a switch box looking at the "open" end
Then I cut out a piece of 3/8 aluminium rail stock to fit the height of the inside of the box
I fit them together and this is what I ended up with.
EDIT:
This is what I eventually ended up with. A single momentary tactile switch. The hole drilled into the rail stock.
Bookmarks