Results 1 to 6 of 6

Thread: My saber's first ignition problem

  1. #1

    Default My saber's first ignition problem

    Hi everyone, I just got my first saber put together and pulled out the kill key. Heard the lil sound that normally plays. But right after that, the saber turns on by itself! So I turn it off, it turns right back on again?? Anyone know why? Any help is greatly appreciated, thank you

  2. #2

    Default

    Are you using a PC? What sort of switch are you using? If you are using a PC, you probably need to go into the configuration files (or R.I.C.E.) and tell it what kind of switch you have installed.
    Boring conversation anyway...

  3. #3

    Default

    Using CF 5.1, Using momentary for main switch and one for aux

  4. #4

    Default

    http://www.plecterlabs.com/Media/Doc...reV5.10-GB.pdf

    In the config.txt file, there should be a parameter called "switch" followed by a number. That number needs to be set to "2".

    Or so I guess. I haven't actually managed to get my hands on a CF yet.
    Boring conversation anyway...

  5. #5
    Force Aware
    Force Aware
    Force Aware
    MasterStoddard's Avatar
    Join Date
    Jan 2009
    Location
    VA, USA
    Posts
    120

    Default

    TuxedoCartman, is wright, it's stated on page 21 of the manual for the CF v5.10

    If you wish to use a momentary switch for the blade activation, set switch to 2.
    Sean

    SciFiHero.net Member; SG Operations Home of SG-Socom Member

  6. #6

    Default

    Cool, found it. Thank you everyone for all your help that you have givin me on my build

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •