The Custom Saber Shop Tutorial - Ordering Powder Coating Using the MHS Builder
Download PDF Version
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint.
To begin the ordering process, click on the ‘MHS Builder’ link from the TheCustomSaberShop.com homepage:
Pick the part that you wish to have powder coated using the navigation bar at the bottom of the page:
Choose the powder coat style and color using the “POWDER COATING” box in the upper left corner. Note: Some items have multiple options for which portions of the part will get coated.
Colors in the builder are for reference only. Click here for actual photos: Powder Coating Colors
Click “Parts List” and then “Add to Cart” to add this piece to your shopping cart at TheCustomSaberShop.com. Note: if a part is not in stock, it will not be added to your cart.
Make sure you check the stock prior to completing your order. You may add multiple parts at one time using this process. Simply pick all of your parts and options prior to adding it to your cart.
Designs created in the MHS Builder can be downloaded to your computer, e-mailed to a friend or sent to The Custom Saber Shop directly after an order has been placed.
Note: If the options available are not what you are looking for or if you have additional questions, you can e-mail The Custom Saber Shop with your downloaded design: email@example.com
After reading this tutorial you should have an understanding how to order powder coated parts using the MHS Builder tool. Additional resources are available on TCSS Forums: http://forums.thecustomsabershop.com/