With all the min-Flex stuff I have seen out there, I decided to build a mini Revan...
The parts I do not already have are getting ordered today. I will try this time to really show step by step, especially on the weathering.
REVN 1.jpg
REVN 2.jpg
It will clock in at 6.9" OAL.
Pico Crumble Dark
R/rB/G Tri-CREE
18500
MHS v1 chassis system (mainly to hold battery, Pico will be taped to battery)
Switch 21
It will have to be charged by opening up the saber and disconnecting the JST to charge with a JST charger adapter. Could not figure a way to squeeze in a recharge port.
I may still find a way to incorporate a 3mm aux LED though...
Now, any suggestions on coloring the banded area on the emitter brass or copper? I do not have a powder coat setup (or any experience).
Bookmarks