Keeping the parts in place

[megajs]

i want to know how to keep the internal parts of the saber (sound card,battery holder etc) from moving around so i can use it for dueling
any suggestions would be nice

[Vlad Doon]

i want to know how to keep the internal parts of the saber (sound card,battery holder etc) from moving around so i can use it for dueling
any suggestions would be nice

You have the chassis sold in Tim's store for crystal chamber but also for securing the soundboard and battery. You can also use the speaker battery combo or making one. You can build a chassis with stuff you have at hand such as pvc tubes with smaller diameters than the MHS part inner diameter. Your imagination is the limit.

[Jenny]

My suggestion would be to do what I did to figure this out (though Vlad Doon's answer above is pretty good!)... go through as many of the build threads as you can, and look at how other people have done it. Also, the word you're looking for is "chassis," which is how the builders here describe the bit you want.

[cardcollector]

The TCSS disks are an excellent way to mount your components.

PVC is also very common as a holder for parts.

Do some searching and you will find numerous examples.