Tenaglia, A Sith Empire Era CFv5.10 Jedi Saber
I can finally post this saber now. I used it in the development of the Ferretium weathering for Kaplan's ESB Degobah Graflex's Diatium Power Core. It is a partially scratch, partially junk MHS, partially found parts saber. The core came from a 616 saber. The "muzzle" section is modified MHS (another junk part I got from Gravy), the box is MHS. The rest of it is custom machined. The claw and claw mount emitter along with the dual wire-wrapped quartz crystal chamber are the highlights for sure and are the features that I built the saber around. It is the "sister" saber to Unghia. I didn't want an external recharge port on her (couldn't find a place I was happy with) so I made a custom speaker/recharge.Crystal Pommel mount combo. Easy to pop out and access the CF as well. The Crystal Chamber is custom machined from Delrin, copper and PVC. It is a slide in piece that also locks the switches in place. There are no visible wires as there are two copper channels built into the chamber for wire carriage. The main crystal mirrors the cyan main blade (white FoC). The secondary crystal is green for contrast. There is also an internal green LED that gives the hint of internal machinations through the copper mesh windows in the muzzle section. I finished it off with a nice leather inlaid grip. Enjoy the claw-y goodness
Particulars:
Tenaglia custom saber
CFv5.10 w/Stock fonts (I love Ancient Saber for this one)
CREE RGBW (Cyan/Aqua main blade w/White FoC)
Touch Plate Activation
Dual Wire-wrapped Quartz Crystal Chamber (Cyan and Green)
Crystal Pommel
7.4V Li-ion (14500) w/1.3mm recharge/kill hidden under pommel
Faux Leather inlaid grip
2W speaker in custom module
The BMT:
The Glams:
Install album (password: tenaglia): http://s291.photobucket.com/albums/l...d/Electronics/
Bookmarks