Need help with parts list!

[Jay-gon Jinn]

Jay gon wiykd "centered 3/4"" from one end be like in the middle? for a 2"Double female threaded connector

and how would i wire in a red led indicator?

No, 3/4" wouldn't center it, that was jut an example of how to word it for Tim...think about it...if you want the switch centered in the middle of the 2" extension, how far from one end would it be?

As for wiring in an accent led, there are wiring diagrams here on the shop's storefront:
http://www.thecustomsabershop.com/wi...er/wiring.aspx

Also, if you didn't know about it, try using this to build your saber first, it will give you some idea of what you'll need for internal space:
http://forums.thecustomsabershop.com...mhsbuilder.php

[Elhia]

Sorry about the wiykd horrible typo
And yeah that was a dumb question 1 inch duh

And the chart shows me that I have to connect the negative wire to both the led and the accent led
how would that be done.

And how do I contact Tim?

[Elhia]

for my earlier post
about wiring how would i solder the buckpuck to the 220ohm 1/4w resistor and then solder it to the switch?
Would i just solder both positive and negative to the resistor when i'm soldering the buckpuck and the switch?


Buckpuck 1000ma 6wire-> 4 AAA battery holder
->220ohm 1/4w resistor ->DPDT Latching red illuminated switch
->Seoul P4 LED & MHS Heatsink Module