I have decided for my second saber to do an Obi-Wan/Luke hybrid. This saber is not yet complete as I have a few things left to complete.
Here is my Obi/Luke Hybrid: (apologies now for large pictar)
Innards:
- Rebel Star Amber LED
- 700ma BuckPuck
- 6v battery pack
- No sound
This will have Activation Box 1 attaching to the top row of screw holes. The standard black latching switch (http://www.thecustomsabershop.com/Pu...tton--P40.aspx) fits inside with the button being vertical. I am wanting it to be horizontal, and coming out the side of the activation box. From what I've done research and what I'm wanting, I'm thinking of getting a tactile momentary switch ( maybe this: http://www.thecustomsabershop.com/SP...itch-P641.aspx) and using the Pololu board. Any thoughts on that? Or maybe a better latching switch that will fit with the button out the side of the box.
Work needing done:
- Trim screws down for bottom row next to pommel, so that screws dont interfere with threading of pommel and extension.
- Thread holes in activation box for screw to fit on top row screw holes.
- Drill larger hole in extension where box sits for wiring into box.
- Drill and tap bottom hole from activation box into extension.
- Wire together saber.
- Have a tasty beverage.
Thoughts and suggestions always welcome.
Bookmarks