Help for cheapy hasbro sound board identification

[Vazan Maceu]

Hello people

I´ve just gutted this cheapy Vader marked "2009 LFL HASBRO", and the board looks like this:



I´ve been looking at the wiring schematics provided here already, but this board looks different from the ones shown in the diagrams. When the saber is powered, the leds flicker a moment and then remain on until a clash happens, flickering again. Maybe just a different board overlay, but essentially the same as the rest? I just want to drive a Lux III from this board, maybe with a recharge port.

Thanks in advance for your help.

[KuroChou]

yup. Exactly the same as the rest, the only exception being that your LEDs are mounted directly through the 90 degree board, instead of having wire leads.
You'll have to use a meter to identify which of the four traces are the neg, and join the appropriate three, but otherwise the 2010 schema should function the same.

[Vazan Maceu]

Nice! I grabbed two of those, a Vader and an Obi Wan, intending to use the soundboards for a couple empty MHS hilts. Very helpful KuroChou, thanks!

[KuroChou]

All of the hasbros are similar enough in design, that if you can figure out why each of the pieces of the parts of a 2010 diagram are wired the way they are, you can pretty well fill in the blanks with any hasbro model.