-
El Blade Adjustment
Hello
I have a question on the best procedure or tools to use to get the polycarbonate to fit the emmiter, previously I just took the finished blade put it on the bench grinder and sanded it down till it fit. But I also had it break, it was 1/16 Th. though, I am now only using Tim's 1/8" Th. Any suggestions on how to proceed would be appreciated.
May the Force
Be with You
Marc E.
-
actually, it should fit right in no problem, but if its just a tad big, you could do what i did once, and that was just take some fine grit sandpaper and wrap it around the area to be worked down and just twist it back n forth it will work, and you can keep checking fit as you go till its just right.
-
Owner of the Custom Saber shop
What are you using for a emitter that the tube wont fit?
Tim
The Custom Saber Shop
-
I built 2 El hilts using your 1.25" emmitter 1, but the 3/4"Dia 1/8th I just bought or the 1/16"th. I previously used will not fit without serious modification. Being this was my first L.Sabers I have ever built I just figured this is the procedure?
-
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by GFORCE13
I built 2 El hilts using your 1.25" emmitter 1, but the 3/4"Dia 1/8th I just bought or the 1/16"th. I previously used will not fit without serious modification. Being these were the first L.Sabers I have ever built I just figured this is the procedure?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
May the Force
Be with You
Marc E.
-
Owner of the Custom Saber shop
did you buy the polycarbonate from me?
Tim
The Custom Saber Shop
-
Yes I did and I discovered the problem, I had only tested the one hilt, it was the one where the 1/16" th. Polycarb blade broke, which I had used a cutting bit to remove the broken piece. Well after I deburred the emitter with the dremel, it fits perfectly, Thanks Tim.
May the Force
Be with You
Marc E.
-
-
You know this is a good question, I don't know what happened either, it must be an Imperial Plot,[] Oh and many Thanks for your Blade Design Tutorial you posted on TFE, I don't know how I would have finished my first 2 fightable Light Sabers without it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks