Anakin Conversion Kit Questions

**GanJahMan** · 08-13-2006, 05:25 PM

Just wondering if Graflex brass pins, Glass eye/Red Button Thumbscrew, or Red Button on/off will work with this adapter? By the looks of the pics, some Graflex parts might fit... Thanks!

**O-B 1** · 08-13-2006, 05:37 PM

They should. Its not so much different from the Graflexshop one. Its just one piece instead of two and is cheaper.

"There is no try, only dew" (do)

-Jedi Master Yoda
Essence of the Force

**xwingband** · 08-13-2006, 06:01 PM

There is a dedicated graflex holder... Are you trying to mix and match them to make a ANH or ESB saber?

The buttons might fit, but the graflex and Anakin ones are not the same size for the tube.

<center>Read the FAQ or x-wing won't be happy.

Before posting did you check the Thread Index?.

</center>

**Lord Maul** · 08-13-2006, 08:19 PM

an anakin saber is way bigger in both lenth and diameter. the pins might work but i dought the buttons will

<center>

At last we will reveal ourselves to the jedi, at last we will have revenge.

</center>

**O-B 1** · 08-14-2006, 09:21 AM

Oops, didn't read the topic correctly. Doh! [xx(]

Well, the Graflex kit is cheaper, works better, and isn't made for the Anakin Fx. Its made for a Graflex. What are you converting? That would help alot.

"There is no try, only dew" (do)

-Jedi Master Yoda
Essence of the Force

**GanJahMan** · 08-15-2006, 06:50 PM

Graflex I have already (crafted by one of the finest smiths this side of the outer rim) Im talking about the new TCSS anakin kit. Will Graflex parts fit the new blade holder?

http://s95.photobucket.com/albums/l140/GanJahMan/

**Lord Maul** · 08-15-2006, 06:51 PM

nope

<center>

At last we will reveal ourselves to the jedi, at last we will have revenge.

</center>

**Strydur** · 08-15-2006, 10:04 PM

Graflex pins will..although they would stick into the blade area a tad and need to be sanded down.

Tim
The Custom Saber Shop

**Lord Maul** · 08-15-2006, 10:13 PM

hey strydur, when will the tutorial be up for the anakin conversion?

<center>

At last we will reveal ourselves to the jedi, at last we will have revenge.

</center>

**Chowser** · 08-20-2006, 05:10 PM

ok, actually found some time today to start work with Tim's Anakin Conversion Kit.
Figured I might as well practice and hope I did it right. Guess I will know once the tutorial is released.

here's the LED hooked up to the heatsink.,

here's it powered on (I bought a white LED)

here's everything together

now I will see if I can fit it all together after I make dinner for the family.