whoa whoa whoa very different than what im use to!?!?

[cardcollector]

So, what you will need to do to solder on the pad is;

1. scuff the pads with 400 sandpaper (lightly so you can see some lines)

2. Apply a small amount of solder paste to the pads...

3. Tin the wire

4. Tin the pad. (make sure you iron is hot and clean)

5. Solder together.

If you iron is hot and clean it really isn't that hard...

[thejedilestat]

So, what you will need to do to solder on the pad is;

1. scuff the pads with 400 sandpaper (lightly so you can see some lines)

2. Apply a small amount of solder paste to the pads...

3. Tin the wire

4. Tin the pad. (make sure you iron is hot and clean)

5. Solder together.

If you iron is hot and clean it really isn't that hard...

this none of did i... ok all i did was turn on my iorn wait for it to get hot then i tind the wires then i solderd the wires to the star easy as pie. i thought the star with saber on it was a prank at first =)

[Xanatos1986]

Yes I tined both wired and pads, is all dine wasn't hard to do, I know how to solder was just making sure what was pos and neg thanks guys love the color too