Clash censor help needed

[Jedi_Niklus]

I have the 'quick disconnect' version of the ESB Vader. I wired the conversion as the best I could since the tutorial doesn't cover the wiring for this perticular Vader. I've tried a few things but I can't get the clash censor to work. If anybody knows how to fix this, please let me know.

[Lord Maul]

did it work before the conversion? if so you need to take it apart and redo your wiring. if it didn't work before the conversion, it is probably broken in some way

<center>

At last we will reveal ourselves to the jedi, at last we will have revenge.
</center>

[Do-Clo]

If you could post some pictures of your wiring set up it would help

<center></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Darth Technous Sith Lord</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Give yourself to the Dark Side</font id="Comic Sans MS"></font id="size4"></font id="red"></center>

[Jedi_Niklus]

Maul: Yup. Everything worked fine before the conversion. Its gotta be how I'm wiring it.

Do-Clo, I'll have some pics up later.

[Lord Maul]

i think that behind the DIN plug there are the wires that you see in the conversion along with the sensor. you just rewire it using the DIN plug as the white piece that holds all of the wires on the normal vaders

<center>

At last we will reveal ourselves to the jedi, at last we will have revenge.
</center>