I know this topic has had many treads. But I read a few of them and they all seem to have the same idea. But something dark in the center of the blade and hope the outer layers of the blade will light up. I would like to add to that.
Now I didn’t read every comment on every thread, but has anyone thought of a blade with small little groves going down the shaft of the blade? I was looking at a cheap flea market saber my son got years ago in San Jose. The blade is real messed up and muddy inside from sitting in the rain in the yard, but it still had a lil light going up. It’s a 12” blade. But it made me think, what if there was a clean blade, and a whole lot of poly in the center. Sorry I don’t have a sample but I will draw what I mean once I get this out of my head first. Basically all the small, lines going up the blade would lite up, due to the LED at the bottom. I think poly would work the best because light will come thru. And the light on the shaft will lite up in between the groove on the blade. Now the part I can’t think of is should the grooves be on the inside or out side of the blade. Let me know what you think while I make this doodle of what I’m talking about.
Bookmarks