http://s1141.photobucket.com/albums/...t=IMG_0094.jpg
sorry it took some time to get this stuff loaded, i appreciate you all trying to help... i hope these new images can further you all in my aid
p.s. i just noticed i forgot to add in my two resistors, i was wanting to bundle them with my clash sensor, would that work or would it effect the clash sensor?
Last edited by Hayze; 06-14-2011 at 10:41 PM.
I dont think that the crystal chamber can be that close to the emiter...I think you will have trouble with the heatsink...IMO
"Do or do not....there is no try" - Yoda
I'm confused now. Did you add a small extension between the crystal chamber and the blade holder?
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
the total length of my MHS pasts is 13 inches, the pommel would take up the main switch, the handle is 7", the milled piece which is 1.5 inches is where i want the crystal chamber, a 1.2 inch extension, where i want to put one mini LED, then the blade holder for the main lexeon and heat sink.
I want a lil bit of the main crystal to stick into the handle as 1.5 inches is not alot of space.
sorry if my wiring diagram looks a lil small at the emitter spot.
i sound card will be 1 X 2 X 0.3 inches
Last edited by Hayze; 06-15-2011 at 08:50 AM.
Do you judge me by my size? With the force I am strong.
Posting Permissions
Reply With Quote
Bookmarks