Here it is, in my rush to get the parts for my new saber I forgot to make sure everything was lined up (right now the switch is about 180deg off of where I want it). Will the trim rings that they sell at TCSS fix this problem?
alinement of the MHS parts.
Here it is, in my rush to get the parts for my new saber I forgot to make sure everything was lined up (right now the switch is about 180deg off of where I want it). Will the trim rings that they sell at TCSS fix this problem?
Can't say if the trim ring will work for you or not, (someone who is more qualified than I will need to answer that). But I did run into the same problem in my build. My solution was to use a rubber washer from the local hardware store and trimed out what I didn't need. It left enough play that I could adjust how everything lined up.
Finished Sabers:
05 MR Vader ANH (Red Rebel Star)
05 MR Mace AotC/RotS (White Rebel Star)
Current Project:
FLAMESTRIKE
LAVABURST
was just looking and I think I will have the switch on the side it is on. I will need to "shave" one of the pieces to get it lined up perfictly.
Light sanding on the ends of the tube will rotate them pretty easily. If it needs to rotate between the hilt and blade holder section you may need to sand the heat sink instead or as well.
Tim
The Custom Saber Shop
180 degrees being "half a turn", you need to remove about .0275" from the end by sanding or other mechanical means
AK-47s and Lightsabers, both so fun to build
Everyone's being so helpful and all, but didn't we JUST have this discussion in another thread?
When your lightsabers gutter and die in your hands,
your blaster packs run dry of charge,
your words of power dry up in your throat and I am still standing,
what will you do then?
that we did but seems like people in mood to help out the noob.....its all good though at least he getting the right information right
Try not. Do or do not, there is no try.... Yoda
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
THREAD INDEX
LDM's Basic Saber-build Step-by-Step Tutorial
I started this thread before I saw the other one.
"Do or do not....there is no try" - Yoda
Try looking for similar threads, before starting a new one.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Who cares... I'm not sure why you've even posted in this thread....Originally Posted by (null).exe
KI-ADI-MUNDI on FX-SABERS.com
Posting Permissions
Reply With Quote
Bookmarks