Megami
A Birthday Saber for the Woman of my Dreams
(holy carp! the final version!)
=================================================
So, I'm putting my own builds on hold for a bit, to see if I can't complete something for my wife in time for her birthday on the 18th of July.
The highlights of this build are PC-L Lightmeat, CREE RGBW tuned for Fuschia Pink, Candy or Trans Gold PC and Mirror polished shrouding.
=================================================
EXTERNAL PARTS:
(right to left as shown above)
MPS Insert Style 12
(not shown) MPS C Clip (thanks LMT!)
MPS Style 6
Mirror Polishing
Trim Ring 2, Gold
5" Fluted Double Female Threaded Connector
Extension Powdercoating, SF52, Candy/Trans Gold
12 1/8" holes, chamfered and organized radially around circumference in line with fluting to allow light transmission
MHS Sleeve Material
Custom Cutting
Oval cuts to reveal flutes section, 1/16" larger than flutes
12 3/16" holes, organized radially around circumference in line with fluting to allow light transmission
Mirror Polishing
Trim Ring 2, Gold
MHS Ribbed Extension
Activation Box Style 9 hole drilling
Extension Powdercoating, RIB3, Candy/Trans Gold
Activation Box Style 9
Mirror Polishing
Gold-Plated Momentary Anti-Vandal Switch
2.1mm Power Jack
(not shown) Gold-plated Custom Kill Key
4-40 Button-head Machine Screw
Type 20 Black Button Momentary Switch
Red Accent LED Indicator
Green Accent LED Indicator
Screw-on LED Blade Holder Style 3
Blade Holder Powdercoating, BH32, Candy/Trans Gold
14 1/8" holes, organized 7+7 laterally on either side of emitter to allow light transmission
MHS Sleeve Material
Custom Cutting
Rounded rectangular cut to reveal ribbed section
Ahsoka Tano-style cut to reveal blade holder
Activation Box Style 9 cutout, 1/16" larger than piece
Elephant Silhouette electrochemically etched below activation box
Kanji characters for "Goddess" electrochemically etched above activation box
Mirror Polishing
2 8-32x.3" Gold Thumb Screws
LED Trans White Show Blade, 1" OD, 30" Length, White Round Tip
Poly-c interior wrap
INTERNAL PARTS:
(not shown)
Petit Crouton Locked, Lightmeat font
CREE MC-E RGBW LED, tuned for Fuschia output
TCSS Premium Speaker
MHS Speaker Mount V3
2 Tenergy Li-Ion 14500 Rechargeable AA size 3.7V 900mAh
Tenergy PCB for 7.2V Li-ion battery packs
Chassis Disc 1
Chassis Disc 2
Chassis Disc 3
2 Brass 4-40 All-thread rods, 11.75" ea
2 Aluminum 3/16" OD Tube, 11.75" ea
6 Stainless Steel 4-40 Hex Nuts
Appropriate resistors (havn't done the math yet)
Wire
Heatshrink
NOTES:
Figured I'll make the sled out of basic parts for now, which will leave a strong base to expand on later for full crystal chamber, if she wants.
QUESTIONS:
1. I only saw "Candy Gold" and "Sun Gold" as options in the powdercoating menu, is there a Trans Gold available?
2. I'd like to at least give the illusion of a crystal chamber. Opinions on drilling a set of holes between the pommel end of the fluted section and the rear trim ring, then mounting pink indicator LEDs on that end of the electronics sled so they show through?
Bookmarks