View Poll Results: Which saber is best?

Voters
90. You may not vote on this poll
  • Saber 1

    28 31.11%
  • Saber 6

    7 7.78%
  • Saber 8

    10 11.11%
  • Saber 9

    11 12.22%
  • Saber 10

    33 36.67%
  • Saber 12

    1 1.11%
Results 1 to 2 of 2

Thread: TCSS Saberbuilding Contest - Top 6 Poll

  1. #1
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default TCSS Saberbuilding Contest - Top 6 Poll

    Okay folks, the time for voting has come! Please read the following carefully!

    There were only three entries for the 'custom' contest. As such, there will not be a distinction between the custom sabers and MHS sabers. It's just one big pool.


    Stage 2 - Stage two will only be one poll. The top three sabers from the first two polls will be included in it. Whichever saber wins this vote wins the competition.

    THE ENTRANTS
    #1
    Saber name: Praxis
    Specs:
    · Soundboard : PC L Lightmeat
    · Blade System : Blue SSR90 Driven by 6.6 Amp Buck Driver with Blade Effects Controlled Via PWM Signal From PC L
    · Narrow Beam Optic and 38 Inch Trans White Thin Wall Blade
    · Full Power, or Half Power Double Run Time Modes
    · Fan Driven Forced Air LED Cooling System
    · Crystal Chamber : All Brass, Aluminum, Copper Crystal Chamber Chassis. Three Crystal Chamber, Two Quartz, One Blue Topaz.
    · Illuminated by a Blue laser at 300mw & Five Accent LEDS
    · Always Visible Crystal Chamber Viewing System Using Revolving Two Way Display Door (Protected Normal, and Maintenance Open Positions).
    · Accent Lighting : 7 LED Multi Color LED Display with 2 RGB 1 Blue.
    · Three x Blue .5 Watt Internal/External Blade Power Aura accent LEDs (Driven by PC L Driver).
    · Power System : 2 x 2900mah 18650 High Capacity Batteries.
    · 3 Momentary Switches. One for Primary Power, Blade Ignition, and Auxiliary Effects
    · 3 Pololu Boards
    · 1.3mm Recharge Port
    · Speaker System : Passive Crossover Two Speaker Sound, One 28mm Speaker and One 18mm Speaker
    · Custom Brass Auxiliary Effects Switch Knob
    · Custom Brass Blade Ignition Switch Knob
    · Custom Gold Primary Power On Switch Knob
    · Custom Brass Belt Clip Ring
    · Custom Engraved Solid Brass Trim Rings
    · Solid Brass Engraved Shroud Thumb Screws
    · 11.7 inches length







    #6
    Saber name: SCOURGE
    Specs:
    Petit Crouton 1.5 “Darkmeat” with custom Boot and Blaster fonts
    5W LEDEngin Deep Red
    18650 Li-Ion with hidden in-hilt recharge port
    Custom sliding crystal chamber cover with spring loaded crystal holder (allows different crystals to be interchanged on the fly)
    Custom telescoping swing mounted premium speaker with custom speaker gear cover (to allow for easy access to the PC-L MicroSD card)
    Custom motor stator blade plug
    Custom pewter skull kill key
    3mm white accent LEDs (3 in hilt – 2 in crystal chamber and 1 in the speaker cover)
    Clear quartz double terminated polished crystal in the crystal chamber
    Lighted momentary activation and accessory switches
    Weathered MHS-based hilt







    #8
    Saber Name: Planet Elemental Saber found on Kashyyyk
    Specs:
    Custon Carved & painted PVC hilt
    1" Trans white thick walled blade
    2010 Obi Wan Econo board
    TCSS Clash sensor
    2 TCSS Swing sensors
    PNP transistor & 1ohm 2 watt resistor
    P4 green Led with 5 degree lens
    1 Trustfire 18650 Li-ion
    TCSS red dot momentary switch
    TCSS premium speaker
    Recharge port & accent led in pommel







    #9
    Saber name: Gold Edition Starkiller
    Specs:
    MHS Based
    Brass Graflex Replica Shroud
    PC-L Darkmeat
    2 14500 Li-ion Batteries
    5W LED Engine Red
    Premium speaker
    Momentary tactile switches
    Custom Brass Covertec Kill Key
    Lathed TCSS Blade Plug
    Crystal Pommel
    Red Button Thumbscrew as Blade Retention






    #10
    Saber Name : Blood Wyrm
    Specs :
    Fully Custom hand Carved Aluminum Construction.
    Polished finish with "antiqued" weathering.
    Magnetically attached, Removable crystal reveal plate.
    Genuine Raw Ruby gemstone crystal "heart".
    Custom stainless steel "horn" screws, on/off switch, and kill plug.
    Fully custom chassis, aluminum/plastic sled.
    Custom "teeth" blade plug.
    custom real Sheep Horn Stand, hand painted with the Sith code translated into sith language,
    written in the "sith prophecy" font.

    Fx - Darth Maul board
    5w Ledengin Deep red LED
    crystal leds : 1 red solid, 1 red blinky for "beating heart" affect
    1 x TrustFire Protected 3.7V 2400mAh 18650 Lithium Ion cell
    pololu latching to momentary board
    tcss premium speaker
    mom tact switch
    recharge/ kill plug
    10 deg lens
    1" tcss trans white, thin wall blade w/ bullet tip






    #12
    Saber name: Muur's Revoke.
    Specs:
    PC-L Darkmeat.
    LED Engin 5w deep red
    5* lens
    Premium speaker
    mom push button switches with custom buttons.
    4x AA 2800mah ni-mh batterys
    2.1mm canon recharge port
    34" poly white blade


    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

  2. #2
    Council Member
    Sith Lord
    Lord Maul's Avatar
    Join Date
    Jun 2006
    Location
    Seattle area, Washington
    Posts
    5,168

    Default

    Bump. We had 40 more votes on the last polls. Lets try to beat that
    Aluke123 on every other forum - Old grumpy moderator here

    Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •