Okay folks, the time for voting has come! Please read the following carefully!

There were only three entries for the 'custom' contest. As such, there will not be a distinction between the custom sabers and MHS sabers. It's just one big pool.


Stage 2 - Stage two will only be one poll. The top three sabers from the first two polls will be included in it. Whichever saber wins this vote wins the competition.

THE ENTRANTS
#1
Saber name: Praxis
Specs:
· Soundboard : PC L Lightmeat
· Blade System : Blue SSR90 Driven by 6.6 Amp Buck Driver with Blade Effects Controlled Via PWM Signal From PC L
· Narrow Beam Optic and 38 Inch Trans White Thin Wall Blade
· Full Power, or Half Power Double Run Time Modes
· Fan Driven Forced Air LED Cooling System
· Crystal Chamber : All Brass, Aluminum, Copper Crystal Chamber Chassis. Three Crystal Chamber, Two Quartz, One Blue Topaz.
· Illuminated by a Blue laser at 300mw & Five Accent LEDS
· Always Visible Crystal Chamber Viewing System Using Revolving Two Way Display Door (Protected Normal, and Maintenance Open Positions).
· Accent Lighting : 7 LED Multi Color LED Display with 2 RGB 1 Blue.
· Three x Blue .5 Watt Internal/External Blade Power Aura accent LEDs (Driven by PC L Driver).
· Power System : 2 x 2900mah 18650 High Capacity Batteries.
· 3 Momentary Switches. One for Primary Power, Blade Ignition, and Auxiliary Effects
· 3 Pololu Boards
· 1.3mm Recharge Port
· Speaker System : Passive Crossover Two Speaker Sound, One 28mm Speaker and One 18mm Speaker
· Custom Brass Auxiliary Effects Switch Knob
· Custom Brass Blade Ignition Switch Knob
· Custom Gold Primary Power On Switch Knob
· Custom Brass Belt Clip Ring
· Custom Engraved Solid Brass Trim Rings
· Solid Brass Engraved Shroud Thumb Screws
· 11.7 inches length







#6
Saber name: SCOURGE
Specs:
Petit Crouton 1.5 “Darkmeat” with custom Boot and Blaster fonts
5W LEDEngin Deep Red
18650 Li-Ion with hidden in-hilt recharge port
Custom sliding crystal chamber cover with spring loaded crystal holder (allows different crystals to be interchanged on the fly)
Custom telescoping swing mounted premium speaker with custom speaker gear cover (to allow for easy access to the PC-L MicroSD card)
Custom motor stator blade plug
Custom pewter skull kill key
3mm white accent LEDs (3 in hilt – 2 in crystal chamber and 1 in the speaker cover)
Clear quartz double terminated polished crystal in the crystal chamber
Lighted momentary activation and accessory switches
Weathered MHS-based hilt







#8
Saber Name: Planet Elemental Saber found on Kashyyyk
Specs:
Custon Carved & painted PVC hilt
1" Trans white thick walled blade
2010 Obi Wan Econo board
TCSS Clash sensor
2 TCSS Swing sensors
PNP transistor & 1ohm 2 watt resistor
P4 green Led with 5 degree lens
1 Trustfire 18650 Li-ion
TCSS red dot momentary switch
TCSS premium speaker
Recharge port & accent led in pommel







#9
Saber name: Gold Edition Starkiller
Specs:
MHS Based
Brass Graflex Replica Shroud
PC-L Darkmeat
2 14500 Li-ion Batteries
5W LED Engine Red
Premium speaker
Momentary tactile switches
Custom Brass Covertec Kill Key
Lathed TCSS Blade Plug
Crystal Pommel
Red Button Thumbscrew as Blade Retention






#10
Saber Name : Blood Wyrm
Specs :
Fully Custom hand Carved Aluminum Construction.
Polished finish with "antiqued" weathering.
Magnetically attached, Removable crystal reveal plate.
Genuine Raw Ruby gemstone crystal "heart".
Custom stainless steel "horn" screws, on/off switch, and kill plug.
Fully custom chassis, aluminum/plastic sled.
Custom "teeth" blade plug.
custom real Sheep Horn Stand, hand painted with the Sith code translated into sith language,
written in the "sith prophecy" font.

Fx - Darth Maul board
5w Ledengin Deep red LED
crystal leds : 1 red solid, 1 red blinky for "beating heart" affect
1 x TrustFire Protected 3.7V 2400mAh 18650 Lithium Ion cell
pololu latching to momentary board
tcss premium speaker
mom tact switch
recharge/ kill plug
10 deg lens
1" tcss trans white, thin wall blade w/ bullet tip






#12
Saber name: Muur's Revoke.
Specs:
PC-L Darkmeat.
LED Engin 5w deep red
5* lens
Premium speaker
mom push button switches with custom buttons.
4x AA 2800mah ni-mh batterys
2.1mm canon recharge port
34" poly white blade