Results 1 to 3 of 3

Thread: accent/illum latching - kill switch

  1. #1

    Default accent/illum latching - kill switch

    i asked this earlier and i applogize to Rhyen but in my infinite wisdom, i didnt write it down.
    -
    -
    -
    looking for two accent LEDs and the LED on the Latching AV switch to come on when i pull the kill switch out the recharge port. how would i wire this up?

    BTW this is for my first MHS setup.

  2. #2

    Default

    Wire them up, so they always have power, i.e. they are not dependent on the power switch to complete the circuit, like the main led would be. Battery neg, to resistor-ed LED, back to battery pos. they'll always be on, unless the kill key is in, which breaks the circuit.
    "War is the end result of the failures of the human condition. It is the result of those persons who want to assure their place in history, and those whole fail to learn from that history... "

    "All a man can do is hope that he never has to show what he is truly capable of..."


    Umbral Lotus Knives

  3. #3

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •