i somehow got a hold of a bunch of 28GA pure copper braid that seems to handle 5A with ease at work. not to brag or anything... but it's really great powerline wire.
i somehow got a hold of a bunch of 28GA pure copper braid that seems to handle 5A with ease at work. not to brag or anything... but it's really great powerline wire.
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
Duel - to fight someone 1 on 1. Dual - 2 of something in line with each other.
Originally Posted by Multiple People
Quality 30 guage stranded wire can handle 1.5 amps easy with lengths of less than a foot.
it's fairly simple - carefully strip the heatshrink off, do not let ANYTHING metal touch it, and pay extreme care to a thin metal strip running down the side with tape under it. THAT is the pos and can NOT touch the metal casing or it'll arc and you get explodeys shortly after. cut that strip FAST and CAREFULLY and pull it away from the body. after that, desolder the PCB from the negative end and you're done. easy as nitroglycerin pie topped with napalm and candles. ^_^
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
Duel - to fight someone 1 on 1. Dual - 2 of something in line with each other.
Originally Posted by Multiple People
OK update added to my tutorial post, enjoy![]()
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
a quick tip - i use a cuticle cutter (the V grooved tip ones) to slice through heatshrink with ease if you do need to remove that heatshrink for any reason.
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
Duel - to fight someone 1 on 1. Dual - 2 of something in line with each other.
Originally Posted by Multiple People
I couldn't find stranded 30 AWG. The only stuff I could find was solid core "wrapping wire" at Radio Shack. I had an idea to use this with little terminal posts and actually do a wire wrap setup for the neatness and to save room. But that was only for accent LEDs and switches.
"So he drove out the man; and he placed at the east of the garden of Eden Cherubims, and a flaming sword which turned every way, to keep the way of the tree of life." -- Genesis 3:24 Lightsabers are real.
I figured that this would likely be the best place to post this without creating a whole new thread. I followed the tutorial exactly as shown here, and now my pack is built. I triple checked all my wiring and everything is as it should be. Only problem is that I when I plug my pack into the charger I have a constant green light. It's supposed to turn red when it's charging right?
I built a 7.4 Li-Ion Pack (14500 AA Sized pack) and have a Tenergy Li-Ion Smart charger set to the 7.4 charge setting.
Any help would be most appreciated!
Thanks, Psab
Follow Your Bliss
Double check proper wiring and connections.![]()
And make sure you have polarity correct on the jack/recharge port, and check the connections on your cells.
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
Bookmarks