So thanks to everyone's help I was able to get the saber to work. But I must have messed up my wiring while getting my crash coarse in cram-fu. Now the main led works and that is it. But instead of dealing with the hassle of taking it apart and inspecting. My plan is to take this opportunity to do an upgrade.

Parts list:
1 DPDT momentary green illuminated switch
1 SPST momentary switch with black switch(switch05)
TCSS PC-L board
2 Green LED indicator
1 Activation box style 4
1 Seoul P4 (Green)
1 Collimator Lens 5° viewing angle
L1 uxeon III/P4 Lens Holder
82 ohm 1/4 watt resistor(for accent led)
220ohm 1/4w resistor (for LED illuminated switch)
TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery (2-pack)
2.1mm Power Jack
3.7V-14.8V Li-Ion Smart charger
2.1mm plug adapter for smart charger
Kill plug style 1
premium speaker

I believe that I am not missing anything.
Do need to have a PCB for the batteries if I plan to make a pack that recharges inside of the hilt??
I do need some assistance with calculating the second accent LED. I wish to have that accent work as the "progressive power-on LED" as in the manual. And I need some assistance with the equation and such.
Here is link to how I think the wiring is going to go. Let me know if i need to make an corrections.
http://s1135.photobucket.com/albums/...ent=wiring.jpg