Hi, All. I have one of these AOTC Anakin sabers, and one of the kids friends took it upon themselves to WHACK something with it, and broke the blade at the hilt. Much cursing ensued, but I was able to take everything apart and cut off the blade at the break, then re-drill it, etc, and although the blade is now 4" shorter, everything still worked.

UNTIL

I was putting it all back together. Somehow I knocked a diode loose from the sound board. I could solder it back on if I knew WHERE IT GOES!

Can anyone upload, email, or PM me a picture of both sides of their sound board so I can see where the diode goes to replace it.

Much appreciation for any help!

-Jim