Adding exposed crystal chamber to MR FX saber? Advice? Thoughts?

[ghost_a*]

Normally a 20ma led blue or green has a vf of 3.2v So with a 2aa 3v supply you only need a small 1 ohm res.

so the 150 ohm is WAY overkill then? hahahhahaha
but it won't hurt it right?
meaning i don't have to go out and get a 1 ohm instead and replace it. i'm fine using the 150?

QFT! Thanks for the laugh skott!

Seriously, it is possible to have sound... Just don't plan on dueling with it or you will have a brand new "battle damaged" hilt very quickly

i'm NOT dueling with it. it's for display purposes ONLY.
so that's not an issue at all.

[cardcollector]

Sounds good then.

Oh btw, there is a multi quote button you can use so you don't have to double post

[Jedi-Loreen]

Yes, please use the Multi-Quote button, it's to the right of the Reply With Quote button. Just click that for every post you want to quote, then click the Reply to Thread button. It puts all your quotes into a single post.


Then we Moderators won't have to keep merging your posts.

[dgdve]

Well if you believe you can do it then go for it.
The FX guys aren't as hardcore as us, they fear the challenge

Agree 100%, but you must remember although the fx forums and the tcss forums appear very similar and share the lightsaber theme... the difference is here you are restricted from sales talk... over the years gradually a (friendly)divide appeared.. Here at tcss forums you cant just "pay" to have it done nice and shiney for you (lol real jedi build there own)... tcss is DIY and thats the sheer beauty of it and why here at tcss you will rarely if ever hear that something "cant be done".. it may not be cheap.. it may not be easy.. it may actually not be possible( sry lol) but here we always "Do...or Do not".. there is no "try" at tcss