Graflex conversion questions... and plenty of em

[ztrox93]

sorry james I posted that post before I refreshed the page

Zach Watkins

[james3]

NP

Tim has the pin tool in the store now if you don't have something to take the pins out. I think I am going to get a set of the short pins for my Luxeon deal when I get started on that, they look pretty awesome.

<center></center>

[LAN-ED-TUL]

i had got a larbel saber one time, and no buttons on it functioned. i had to remove the lower red butoon, and use a red button thumbscrew and used the graflex shops el socket. the top switch was removed and a replica working button in its place. i then used a micro switch mounted underneath it so when pressed it operated the micro switch.

tims lux holder has the same type slot for mounting a switch underneath or use corbins with swicth inside the red button.