Sith Striker by Rhyen Skytracker

[Rhyen Skytracker]

Here is one of my latest sabers that I call Sith Striker, because you strike sith with it. LOL It is custom machined and has a 2010 economy board with the transistor set up, TCSS premium speaker and 4 AAA akaline battery pack with a blue Cree LED and a red guarded switch. It also has a trans white thinwalled blade from TCSS.

[iamdrake]

Looks sharp.

[Lawrs1]

Nice work as always Rhyen

[equinox13]

very nicely done. simple and elegant as they should be. i love that BH too.

[Ronan]

Posted on your youtube, good work.

[Knighthammer]

Looks great - I too am a fan of the BH.

[Lord Dottore Matto]

Very OG Do-Clo. I like it.

[Don Se Wion]

Very nice saber Rhyen !!

Can I ask you which lens did you use with the Cree ?

I'm asking because some times ago I retrofitted my saber with the same LED and had to use a 6° lens made by Ledil because was the only one specifically built for the XP-E sourced easily here in Europe. The drawback of this solution is that the lens is about 1 mm longer than the standard lenses used with MSH parts creating a small gap between the lens holder and the body.
I have a Rebel lens being shipped right now which seems to be compatible to me and I'm planning to test it with the Cree in my new saber but perhaps you followed a different path.

[Rhyen Skytracker]

I used a 8 degree lens with the standard CREE lens holder. I did some slight modifications to the lens holder and blade holder to make it fit.

[Don Se Wion]

Thanks Rhyen.