Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: Rough Draft for Saber Wiring

  1. #1

    Default Rough Draft for Saber Wiring

    Okay so I think I got the layout right, but I am not totally sure since I had to combine three seperate Diagrams I found in the various posts/Threads. The way it looks in the picture is not how it is going in the saber. I am going to put the speak/battery box in the bottom section of the hilt and the board PnP regulator and possibly the resistor(s) in the middle with the switch being just behind the heat sink/Blade Holder. And tweaks would be greatly welcome from you all

    SAber Wiring Draft 2.jpg
    "He who sheds his blood with me shall be my brother."

  2. #2
    Jedi Initiate
    Jedi Initiate
    equinox13's Avatar
    Join Date
    Oct 2010
    Location
    Zama City, Japan
    Posts
    493
    Blog Entries
    1

    Default

    that is WAY too small for me to read...
    Now known as Azmaria Dei
    i really need "meow on clash" mya! =^_^=

    duel - to fight someone 1 on 1
    dual - 2 of something in line with each other

  3. #3
    Jedi Council Member cardcollector's Avatar
    Join Date
    Jan 2009
    Location
    I am A proud American.
    Posts
    2,567
    Blog Entries
    3

    Default

    Can't read it dude...
    Got a Question? There's a thread for that...
    ~Do what you can, with what you have, where you are.~Teddy Roosevelt

    SollusVir everywhere else... FXsabers, Youtube, etc...

  4. #4

    Default

    Ok my image did not load right. I will have to correct it when I get home to my laptop. sorry guys
    "He who sheds his blood with me shall be my brother."

  5. #5

    Default

    Ok so I have finally uploaded what I think to be the right wiring Diagram to Photo bucket. If you can look at it and let me know what I needd to chage as well as if the needed resistors are different than what I owuld use according to TCSS resistor chart please let me know.



    Red = Positive
    Black = Negative
    Blue = Other
    Last edited by Erist Trieber; 12-14-2010 at 07:39 PM. Reason: forgot info
    "He who sheds his blood with me shall be my brother."

  6. #6
    Jedi Initiate
    Jedi Initiate
    equinox13's Avatar
    Join Date
    Oct 2010
    Location
    Zama City, Japan
    Posts
    493
    Blog Entries
    1

    Default

    as near as i can tell, that's just wired all willy nilly. i have NO idea how that will ever work in any conceivable way... use either the second diagram here or the second diagram here and the recharge port wiring here.

    also, if you plan on using 6V, you must use a 5V regulator or you WILL blow up your econo board. as for resistor sizes, those can be found in the resistor chart here.
    Last edited by equinox13; 12-14-2010 at 08:33 PM.
    Now known as Azmaria Dei
    i really need "meow on clash" mya! =^_^=

    duel - to fight someone 1 on 1
    dual - 2 of something in line with each other

  7. #7

    Default

    Ok so if I use this Diagram http://forums.thecustomsabershop.com...874224&thumb=1 how would I connect the Recharge Port? I think I know but I want to make sure
    "He who sheds his blood with me shall be my brother."

  8. #8
    Jedi Initiate
    Jedi Initiate
    equinox13's Avatar
    Join Date
    Oct 2010
    Location
    Zama City, Japan
    Posts
    493
    Blog Entries
    1
    Now known as Azmaria Dei
    i really need "meow on clash" mya! =^_^=

    duel - to fight someone 1 on 1
    dual - 2 of something in line with each other

  9. #9

    Default

    Awsome sauce that is what I was looking for. Ok on a side note do you know of anythign that I could use that would let me take two single sabers and turn them into a maul saber style that is a quick release? and also what is the REAL difference between the vairous characters sabers? other than handle and color? are all the Sound FXs the same or am I tone deaf lol
    "He who sheds his blood with me shall be my brother."

  10. #10
    Jedi Initiate
    Jedi Initiate
    equinox13's Avatar
    Join Date
    Oct 2010
    Location
    Zama City, Japan
    Posts
    493
    Blog Entries
    1

    Default

    there are only 3 SFX that MR/Hasbro uses - Sith, Jedi, and Ventress. and the first two sound somewhat similar in my opinion...

    as for the double bladed coupler, Tim is working on one and it may get added to the store in the next couple months with any luck. discussion on that is here.
    Now known as Azmaria Dei
    i really need "meow on clash" mya! =^_^=

    duel - to fight someone 1 on 1
    dual - 2 of something in line with each other

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •