MHS3 or "As the world turns the volume down"
the crystal chamber has a quartz and an RGB LED lighting it - the LED is setup so that as the battery level goes down, it slowly bleeds from violet to purple to red. i used an Obi econo board with the wiring that i've posted elsewhere - stunt with optional sound and the econo LED output going to a vibe motor. thankfully i had a motor that took the small amount of power that the Obi board puts out... the speaker is a (lol) 'premium' speaker from a dead laptop. i thought it was loud until i heard the TRULY premium speaker that Tim sells. i have a rubberized shroud/grip that i cut from a shielding/cushioning material from a dead laptop (another part scavenged from that thing ^_^). finally got the trim rings for it today, so that's why i'm finally putting this pic up now. the main LED is a red P4, chosen for the low voltage requirement, and so that it will stay on when the battery is close to dead.
Gallery
Bookmarks