Greetings all,

I am trying to get deep sleep mode to engage on my saber, but it doesn't appear to be working. It's my first build so I might have the configuration wrong, the wiring, or perhaps I misunderstand how deep sleep mode works. Before I start messing with the wiring I wanted to check to make sure I've got the configuration right first.

I have sleep=5000, wakeup=0 in the override.txt file. Two AV switches (power and aux) wired to the General Power-On pad outlined in the manual on page 37. The LEDs never go off; I don't see any change in powering the saber on either, which is to say I press the button and it turns on immediately without playing a boot sound. I thought deep sleep powered off the entire system like putting in a kill-key, is it only for accent LEDs?

Thanks