2004 MR ESB Soundboard Help

[Ronan]

Anyone have a diagram of the 2004 Master Replica ESB soundboard?

I found the yoda one, the anakin one and the vader one, but AFAIK they look different.

This one has the soundboard + separated board of sensors + separated board for battery connections and then 4 wire switch).

Power Source: 2x14500 (7.4v)
Switch: Pololu SV board + momentary switch.
Blinkies: 2x5mm Blue LED's (Bought a 270ohm 1/4w resistor to protect them)
Main LED: Lux III Cyan Bin 1

**I have a 5v regulator, which I'm told is needed to protect the board**

Looking for a diagram to make all of this work for my ESB build...

Thanks

Edit:
Matt found me this: http://forums.thecustomsabershop.com...ad.php?t=11104

A lot of help, now i'm wondering where does the 5v regulator fit in all this? Thanks

[equinox13]

**I have a 5v regulator, which I'm told is needed to protect the board**

A lot of help, now i'm wondering where does the 5v regulator fit in all this? Thanks

on the positive line going into the board i would think. that's where i put mine on everything that needs them.

[Ronan]

on the positive line going into the board i would think. that's where i put mine on everything that needs them.

The prongs are as follow:
Output
Ground
Input

So positive of power source to input of regulator and then back out of the regulator from the output to the positive of the board? What about Ground?

Thanks bud

[equinox13]

output - board positive lead
ground - system ground/battery negative
input - positive from battery

[Ronan]

output - board positive lead
ground - system ground/battery negative
input - positive from battery

Ok, so i need to make a splice of the battery negative just for the regulator?

[equinox13]

yep - that's the essence of it ^_^

[Ronan]

yep - that's the essence of it ^_^

Ok dokie, i'll do it tonight or tom night.

I'll be sure to come bother you if i need help

Thanks bud.

[equinox13]

i'll be here ^_^