New guy here needs some help

[Grifter2444]

I just bought a Obi wan kenobi clone wars light saber, how do i wire it up? I have a 4xAA battery pack with a P4 Green 5 watt led, and a 2.2 ohm resistor.
Do i hook the board up straight to the batteries and then the board to the switch, with a resistor bewteen the switch and led?

[jin starkiller]

if it is the new 2010 hasbro with dvd you will find everything you need to know how to wire it up here

http://forums.thecustomsabershop.com...ht=2010+hasbro


also a p4 takes this resistor

http://www.thecustomsabershop.com/33...istor-P15.aspx

you also need a tip42 transistor to hook it up

http://www.radioshack.com/product/in...ductId=2062613

[RevengeoftheSeth]

I though P4 Cree was a 3W LED? Do you know the correct voltage and current for the 5W?

[Grifter2444]

Im not 100% sure. Your probably right. I got it out of the kit from CSS. It was supposed to be here today so i could wire it up, but its not. I have a freind thats better with electronics than i and he just wanted to make sure he wasnt gonna blow up my investment.

[jin starkiller]

which kit did you get the p4 or the lux 3 ...makes differece for the resistor

[Grifter2444]

If i am readint the diagram corrctly i need a Y splice on the Battery - to the board and the led, and a Y splice from the battery + to the board and the the pnp transistor?

[Grifter2444]

i got the p4 green kit, with a 2.2 resistor in the kit

[jin starkiller]

p4 green needs a 3.3 ohm 5w resistor

want to double check so u have the right resistor

[Grifter2444]

Thanks so much guys i really appreciate it. And Jin I am reading that right? 2 Y splite on the battery + and-?

[equinox13]

another note - you're running a 4x AA battery pack? with regular batteries i assume? that would be 6V and the board isn't happy with anything over 5v. i ramped one of mine up to 5.5V on a DC power supply and the speaker started buzzing at me and the LEDs built into it got super bright and desoldered one of the connections for me. just be sure you have one of those 5V regulators for safety reasons is all i'm saying.