I have the 2010 hasbro with dvd yoda sound board and cant seem to understand where the switch wires go since it didn't have any on the board or anything else for that matter connected to power it up ...thanx
I have the 2010 hasbro with dvd yoda sound board and cant seem to understand where the switch wires go since it didn't have any on the board or anything else for that matter connected to power it up ...thanx
Try not. Do or do not, there is no try.... Yoda
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
THREAD INDEX
LDM's Basic Saber-build Step-by-Step Tutorial
if you look closely at the board all the required connections are labeled beside the pads
i looked at the board and saw only a label for sw1 and a lot of other traces just unsure of where the other wire needs to be soldered is all
Try not. Do or do not, there is no try.... Yoda
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
THREAD INDEX
LDM's Basic Saber-build Step-by-Step Tutorial
i've pointed out where i put my switch wiring in this post with a picture for the yoda board i used. a lot of labels are on the back side. as for wiring the switch, the contacts for both ends are in the switch pad and the contact of the button material bridging them is the rest of the switch.
http://forums.thecustomsabershop.com...447#post183447
Now known as Azmaria Dei
i really need "meow on clash" mya! =^_^=
duel - to fight someone 1 on 1
dual - 2 of something in line with each other
Bookmarks