This thread will be my official thread on my Graflex with full Crystal Chamber Chassis.
I will constantly update the first couple posts to make it easier for people to follow. This is my first 'build thread' for ANYTHING, please bare with me (support is very welcome, it is a great source of motivation).
PART I -Delayed Arrival-
After many rising and setting of the sun, my Graflex 3 Cell has arrived. A faithful clone provided by Master Tim 'Strydur'. Where it lacked in vintageniousity (yes i made up a word), it made up in potential.
The primary source of delay came from a faulty hypderdrive engine, causing the intergalactic postal-ship delays. The secondary source of delay, came from scrupulous and greedy Toydarian custom officers with held onto the cargo for two weeks.
With the precious cargo finally in my hand, i decided to snap some photos before and after dis-assembly:
Whats inside a Graflex 3 cell? Here are some of the parts:
PART II -Crystal Chamber Chassis-
Parts have arrived fresh from the workshop of Master Gabywan. His famous Crystal Chamber Chassis, as a custom ordered DIY kit, ready for my personal modifications.
A FULL review will be posted on FX-Sabers forum later.
Picture provided courtesy of Gabywan:
PART III -WIP-
Laptop Died With All Photos...
PART IV -Luke Skywalker's Graflex w/ Modified Gabywan Crystal Chamber Chassis, ESB Edition-
I would personally like to thank everyone that help make this possible. From TCSS forum providing information, to members (you know who you are) that took the time to help me, and even find me certain parts (again you know who you are).
THANK YOU!!!!
Bookmarks