ok so i don't need the resistor is that what you are saying....first time using rebels
ok so i don't need the resistor is that what you are saying....first time using rebels
Try not. Do or do not, there is no try.... Yoda
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
THREAD INDEX
LDM's Basic Saber-build Step-by-Step Tutorial
Even with no resistor, a 3V battery pack is not enough voltage to properly power that LED.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
ok so go up on my voltage got it ...thanks
Try not. Do or do not, there is no try.... Yoda
CLICK HERE FOR ALL YOUR ECONO SOUND BOARD WIRING DIAGRAM NEEDS!
THREAD INDEX
LDM's Basic Saber-build Step-by-Step Tutorial
Regarding the use of a resistor with the red P4, the store suggests using a 4.7 ohm/5 w resistor...but here I read to use a 2.2 ohm/5w resistor. Which resistor would be the better choice for use with the red P4? I wanted to do a LUX III conversion on my older MR saber (3 AA batteries putting out 4.5v) but since LUX III's are no longer to be found, I suppose I wil use the P4 but want the correct resistor.
if you're using an MR board, you'll have a constant 3.5V 1000-1200mA coming off of the LED wires on it. to cut that back to a level that won't explode your red P4, you need either a 1 ohm or 1.2 ohm resistor, depending on what your board output is (1000 or 1200mA).
Now known as Azmaria Dei
i really need "meow on clash" mya! =^_^=
duel - to fight someone 1 on 1
dual - 2 of something in line with each other
Yes...I do plan on using the origional MR board with my conversion. I'd hate to toast the P4 without the proper resistor.
Bookmarks