i have a luke ROTJ that im planning on doing a conversion myself. i have researched a ton and found the LED i am planning to use. im using the 10 watt LEDengin RGGB led with the red and blue in series as well as the green and have them on a 3 prong switch so i can have green or purple on the fly. ive read that the stock boards dont allow enough voltage to power a 6 volt set up. so i am looking at getting an ultrasound 2.5 since i can program it to power a lux V which is around the same voltage. i looked up the maker of these boards, novaconceptions but ive heard some pretty bad things from him like fraud and terrible customer service so ill look on FX or something to see if i can get one. :P maybe ebay. whats the deal with all that anyway? looks like hes doin a new type of soundboard.
ANYWAY
my question is since this is a 10 watt LED would the standard heatsink that comes with the luke ROTJ kit be sufficient with this LED or would it be advised that a make a bigger one.
thanks for the help. wow there is so much information here. this place is awesome :P
Bookmarks