Hello Saberites!!!
Yes, as you've probably guessed, it's an Ahsoka Tano variant...
I've always thought Ahsoka's saber was a bit lacking - those two black stripes down the side of the saber - why don't they light up?
So with that in mind, I decided to try and build an Ahsoka using EL wire to light up the sides. This is a padawan saber (albeit with the somewhat pricey and rare Acerocket pommel)... due to the size of the sink tube blade holder, this saber is a tad on the long side.. if I were to do it again, I probably would have moved the PLI more towards the pommel.. and maybe tried to better recess the EL wire.
Specs:
Lux3 Cyan
1.25" sink tube
MHS to 1.25" sink tube adapter
Acerocket Pommel
Double Female adapter
Double Male adapter
2010 Hasbro Vader board
PNP Transistor
Premium sound
4AAA batteries
1.5V EL inverter and aqua EL wire
Power Level Indicator
Powdercoated in Ultimate Chrome
Black accents via rustoleum black semi-gloss
Bunny ears (BTW, I have about 7+ feet of this stuff left if anyone else wants some!)
Glams!
Enjoy!
-C
Bookmarks