Seran's New plan
OK new plan the US2.5 i bought got fried in transit so that sucks any way here's the new plan white P4, Asajj fx soundboard, recharge port ,AAA 1000mAh NiMH Rechargeable battery, 4AAA battery pack, Latching red illuminated switch and speaker. can someone give me a possible wiring diagram and is it possible to wire 2 speakers to a MR board?
New! Improved! Now, complete with punctuation!Originally Posted by Enzerumo
To answer your question about the speakers, yes it is possible. However, be concious of how you wire them. Wiring them in series, I believe, will increase the impedence of the speakers to 16 ohms. Wiring them in parallel will decrease the impedance of the speakers and you will end up at 4 ohms.
I believe wiring in series/parallel will keep it at 8 ohms. You can accomplish this by running one wire from the board + side (one to speaker A's + terminal) and one wires from the board - side (one to speaker B's - terminal). You then run a wire from the positive of speaker B to the negative of speaker A.
The rest, someone else will have to do. I don't have anything except MS Paint to draw up a diagram and I hate using MS Paint.
Last edited by RevengeoftheSeth; 09-17-2010 at 08:41 PM.
OK wiring check time see if this works if it does woohoo also is there someone I can pay to do the wiring for me sadly I have carpal tunnel so I can't solder in close proximity it looks like a seismograph and I don't want to screw up my Asajj soundboard
p.s. I don't care about punctuation and grammar so DON'T complain.
EDIT: Switch will be wired once Shadar Al'Niende is done with his experiment.
You have your speakers wired in series. You want them in paralell (pos to pos, neg to neg).
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
Commisions are not allowed to be discussed here on TCSS. There is a store attached to this forum.
You can read the guidlines here. http://forums.thecustomsabershop.com...ead.php?t=7360
I know you don't care about puncutation, however, if you want your questions to be answered with respect, and you want us to answer them quickly, you need to use good puncuation.
Many of these threads are used as an encyclopedia, the more coherent thoughts, and sentences are put together, the easier it is for others to find and use information.
Just keep that in mind.
Got a Question? There's a thread for that...
~Do what you can, with what you have, where you are.~Teddy Roosevelt
SollusVir everywhere else... FXsabers, Youtube, etc...
Why not? You should. It's how you are presenting yourself to the world, when you are on a message forum.
We care, which is why we complain.
It also makes your post easier to read, so we can understand better, and more quickly, how to help you.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Experiment over. de-solder the sswitch from the board and use pad 2 and 3. find my thread for more info. if you cannot,
i will link it here later.
*Edit* Nevermind here it is: http://forums.thecustomsabershop.com...ad.php?t=11557 read and be edified
Last edited by Shadar Al'Niende; 09-19-2010 at 09:03 PM.
Every time Tim ships an order... an angel gets its wings
"Just get one and go nuts, that's how this hobby works. Get stuff. Go nuts. Period." ~FenderBender~
Posting Permissions
Reply With Quote
Bookmarks