-
-
That's good enough to get it going. If you're going to build an internal chassis wait until you have the Graflex and blade adapter so you can make precise measurements. I can't see that you'll need specific screws for the job other than mounting the d-ring. You can use a regular 8/32 thumbscrew to secure the blade until the red button/glass eye thumbscrews come back. Also, do a web search for Graflex conversion thumbscrews. You'll find a site or two you might choose to order from should this one not restock those items.
Last edited by B5813; 09-10-2010 at 07:36 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks