Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: My hilt and blade parts!

  1. #1

    Default My hilt and blade parts!

    My first saber and well, I finally know what I want... now for the check!

    I would like to create a P4 Blue saber, with a Hasbro soundboard, that I will surgically remove from its plasic shell!

    At the moment I have the following (though I have a feeling I am missing something regarding the soundboard):


    Activation box style 1 + Natural Card
    7 piece Rubber Grip (I am going for a Vader/AnakinEp2 and Ben/LukeEp6 look)
    Trim ring 3 (will be placed between main hilt body and extension)
    Blade Holder style 12
    MHS Ribbed extension V-Grooved
    Hilt style 1 with standard switch hole
    MPS Pommel style 3 V1
    MPS Clip for pommel
    MPS Insert style 12

    8/32 x 1/2" thumb scew
    SPST Push on/off - Mom swith with black button + Bezel nut for nice finish
    Seoul P4 Blue LED
    Luxeon Collimator Lens 5 deg viewing angle
    LuxeonIII/V Lens holder (I know about the 5 deg lens fitting issue)
    BuckPuck 1000mA 4-wire
    LED "Corbin style" Battle blade 1" OD
    4AAA battery holder
    Premium Speaker
    MHS speaker mount V2
    *EDIT thnx to Jin Starkiller: 2 Wire quick connector (when it is in stock again! :P)

    Not all items are in stock at the moment, but this is what I am going for... any suggestions or adds that I've missed?

    Rian out!
    Last edited by Rian Jardrit; 08-12-2010 at 01:27 AM.

  2. #2

    Default

    sounds like you have everthing in order but if you decide later on you want to switch out the led use this it makes that easier

    http://www.thecustomsabershop.com/2-...ector-P38.aspx

  3. #3

    Default

    I bought out the last 2 connectors, so he'd have to wait until Tim restocks them.

    Are you sure the Hasbro board requires a momentary switch? I can't remember for sure.
    Last edited by RevengeoftheSeth; 08-11-2010 at 11:48 AM.

  4. #4

    Default

    Yes it does require a momentary.

    Click here to learn all about me!
    The Shoutbox: The only place you can double post!
    Anybody who spells it Lightsabre is dyslexic
    "Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
    "You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent

  5. #5

    Default

    Quote Originally Posted by jin starkiller View Post
    sounds like you have everthing in order but if you decide later on you want to switch out the led use this it makes that easier

    http://www.thecustomsabershop.com/2-...ector-P38.aspx

    Ah yeah! I forgot that one, it's out of stock atm, so I forgot it, since I couldn't add it to my cart...

    Thnx
    Do... or do not, there is no try!

  6. #6

    Default

    Quote Originally Posted by Skottsaber View Post
    Yes it does require a momentary.
    yeah... like he said!

    Hey, I might be a extreme n00by here on the site, forum and the whole saber crafting, but... I HAVE READ the forums!

    I've learned from this thread: http://forums.thecustomsabershop.com...ead.php?t=7587
    Do... or do not, there is no try!

  7. #7

    Default

    Quote Originally Posted by Rian Jardrit View Post
    yeah... like he said!

    Hey, I might be a extreme n00by here on the site, forum and the whole saber crafting, but... I HAVE READ the forums!

    I've learned from this thread: http://forums.thecustomsabershop.com...ead.php?t=7587
    Nah I coulda swore one of the hasbro boards required a latching switch >.<

    I have too much information swimming around in my head - I've developed electronic dyslexia. I just wanted to at bring it up so it could be double-checked.

  8. #8
    Council Member
    Jedi Council Member
    Jedi-Loreen's Avatar
    Join Date
    Dec 2005
    Location
    Not of this Earth
    Posts
    6,077

    Default

    Rian, please use the Multi-Quote button next to the Quote button, it has the " on it.

    Click that button on each post you want to quote first, then click Post Reply and it will put all the quotes in your post, where you can respond to each in a single post. Then you won't have to double, or triple (or whatever number) post.

    Thanks.
    In order to see the Light,
    you must sometimes risk the Dark.
    TCSS MODERATOR


    BLUE 8 Ready to ROCK and ROLL!

  9. #9

    Default

    ok sure, next time I'll will use that option, thanks for notifying moi!

    Just saw the other post after I posted the first, so... but I'll keep it in mind for another time, tnx

    Quote Originally Posted by RevengeoftheSeth View Post
    Nah I coulda swore one of the hasbro boards required a latching switch >.<

    I have too much information swimming around in my head - I've developed electronic dyslexia. I just wanted to at bring it up so it could be double-checked.
    Hehe, double checking is always a good idea!
    Last edited by Rian Jardrit; 08-12-2010 at 12:52 AM.
    Do... or do not, there is no try!

  10. #10

    Default

    I had a question for my current set-up:

    Is it possible to replace the buckpuck with the LED driver board (+add-on) from the store? I searched for Twirling sabers on youtube and saw the extend/retract movement of the light... that is pure AWESOMENESS there!

    Sooo... is it possible to learn this pow... uuuh possible to build it in my current lightsaber set-up? If not, could someone please tell me what else I need? Thank you!

    Rian out!
    Do... or do not, there is no try!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •