Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 60

Thread: PolyC Tips!!

  1. #1
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,521

    Default PolyC Tips!!

    I finally got a good working polyc tip with shoulder prototype. I glued one on and let it sit for about an hour. Then I proceeded to smack it against everything I could find including my concrete floor and the damn sucker wouldnt come off for anything. I wish I had a video camera to show you just how much abuse these can take. I will get them made up as soon as I can.

    Tim
    The Custom Saber Shop

  2. #2

    Default

    awesome! finally, no more scotch tape, lol

    "This is U.S. history, I can see the globe right over there..."

  3. #3

    Default

    Awesome!!!

    So will they replace the acrylic ones in the Complete Blades, or will we have to buy them separately?

  4. #4
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,521

    Default

    I try and use the best possible so yes the acrylic ones will no longer be used in the blades once I have these in stock.

    Tim
    The Custom Saber Shop

  5. #5
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,899

    Default

    Will these be the same/similar to corbin's tips?

    This reminds me I need to go whack something good.[]

    EDIT: Video... working on it. I took a baseball bat swing at my basketball hoop. Still on there.[]

    EDIT2: Video! http://www.classmaterial.com/~_3513/...king%20001.MOV

    If you doubt it... watch the frame by frame.[] Look at that PolyC bend.

    <center>Read the FAQ or x-wing won't be happy.
    Before posting did you check the Thread Index?.

    </center>

  6. #6
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,521

    Default

    The tips corbin currently has are acrylic one with a shoulder piece glued onto it. The ones I will have are PolyC and have the tip and shoulder molded as one piece.

    <font color="red">Try some direct hits to the tip xwing. </font id="red">

    Tim
    The Custom Saber Shop

  7. #7
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,899

    Default

    Well, it'll have to wait as the sun is setting here. I'll have to figure out how to get a good view of a tip hit anyway. At least it shows that they won't fly off in normal dueling (I did that before at college and that tip was GONE! Even after move out it wasn't found[?]). If they're one-piece that's even better![]

    Sounds like more to add to my next order.[]

    <center>Read the FAQ or x-wing won't be happy.
    Before posting did you check the Thread Index?.

    </center>

  8. #8
    Jedi Council Member Firebird21's Avatar
    Join Date
    Mar 2006
    Location
    Hell if I know... Member#: 921
    Posts
    2,319

    Default

    []




    Have you read your Thread Index today?
    FAQ
    Official Designated TCSS Jester!

  9. #9
    Council Member
    Jedi Council Member
    xwingband's Avatar
    Join Date
    Nov 2005
    Location
    The training simulators, duh!
    Posts
    5,899

    Default

    Yeah, that's neat isn't it?[]

    <center>Read the FAQ or x-wing won't be happy.
    Before posting did you check the Thread Index?.

    </center>

  10. #10

    Default

    Dang xwing! Ya got game brother![]

    I love the look you have while your beating that sucker.[]

    <center></center>

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •