Parts List

[AEwizard]

I am hoping to order these parts sometime. Have any powder coating ideas?

HILT:

7" Fluted with standard style switch hole

MHS choke style 1

Screw on LED blade holder style 10

MPS Pommel style 4

8-32 x 1/8" Set screw (blade retention)

MPS Clip

MPS Insert style 9

Electronics:


Build Your Own Luxeon III Electronics Kit (red)

Cheapy Hasbro Sound.

Did i miss anything?


EDIT:

here is the picture with powder coating:


http://s794.photobucket.com/albums/y...rent=saber.png

[JamoUp]

make sure the switch you chose is compatible with the soundboard. You should need a momentary with the cheapy boards.

[AEwizard]

OK. i buy one at the shack

[Jedi-Loreen]

Why buy one at RadioShack? Just add one to your order. If you buy one somewhere else, you can't guarantee that it'll fit in the switch hole properly.

[AEwizard]

thanks.

[Skottsaber]

And will you drill and tap your BR screw hole yourself? If you do you will need to buy a tap if you don't have one already.
Do you have a speaker? The premium speakers in the store will improve the sound quality.
I suggest you buy a few quick disconnects or JST connectors. Put one on your LED so you can change it between any other future sabers.

For PC I would get:
Main body: DFS2
Choke: CH13
Pommel: PM41

In a black color.

[AEwizard]

Thanks for the advice. I will buy the speaker and the quick connects. I have a tap kit. Ill look into the colors. Its suppose to be a sith saber.